Article

Hendra, Hendra and Indriani, Anizar and Mardian, Andri and Kholik, Nurul and Rispandi, Rispandi and Suhartini, Yenni (2021) Analisistegangan pada struktur mesin pencacah plastik menggunakan metode elemen hingga (MEH) dan uji kerja mesin pencacah plastik. METAL: Jurnal Sistem Mekanik dan Termal, 5 (1). pp. 9-16. ISSN 2598-1137

Indriani, Anizar and Darmana, Ija and Hernadewita, Hernadewita and Setiawan, Ari and Hendra, Hendra (2020) Control Output of Generator Translation and Rotation using Buck Boost Converter for Swea Wave Power Plant. International Journal of Mechanical Engineering and Technology (IJMET), 11 (5). pp. 61-74. ISSN 0976-6340

Indriani, Anizar and Manurung, Gordon and Daratha, Novalio and Hendra, Hendra (2019) Perancangan Turbin Sumbu Horizontal dan Sumbu Vertikal untuk Pembangkit Listrik Tenaga Angin (Studi kasus di Kota Bengkulu). Jurnal Amplifier, 9 (2). pp. 158-163. ISSN 2089-2020

Indriani, Anizar and Julianto, Rifki and Hendra, Hendra and Tanjung, Ariani (2019) Optimalisasi Performansi Generator Sinkron Gerak Translasi dan Rotasi Pembangkit Listrik Tenaga Gelombang Laut. Jurnal Teknik Elektro dan Vokasi, 5 (1.1). pp. 127-132. ISSN 2748-6086

Indriani, Anizar and Fajri, Marahalim and Hendra, Hendra and Witanto, Yovan (2019) Kontrol Kualitas Kadar Air Laut Menggunakan Fuzzy Logic Untuk Habitat Ikan Kerapu. Jurnal Teknik Elektro dan Vokasi, 5 (1.1). pp. 77-83. ISSN 2746-6086

Indriani, Anizar and Witanto, Yovan and Supriyadi, Supriyadi and Hendra, Hendra (2017) Sistem Kontrol Kekeruhan dan Temperatur Air Laut menggunakan Microcontroller Arduino Mega. Jurnal Teknik Mesin, 6 (3). pp. 158-163. ISSN 2089-7235

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Yoserizal, Yoserizal (2016) Assembly Programmable Logic Control (PLC) in the Rotary Dryer Machine for Processing Waste Liquid System. Applied Mechanics and Materials, 842 (1). pp. 319-323. ISSN 1662-7482

Indriani, Anizar and Hendra, Hendra and Witanto, Yovan (2016) Error of Assembly Microcontroller Arduino Mega and ATmega in the Control of Temperature for Heating and Cooling System. Applied mechanics and materials, 842 (1). pp. 324-328. ISSN 1662-7482

Indriani, Anizar and Johan, Johan and Witanto, Yovan and Hendra, Hendra (2014) Pemanfaatan Sensor Suhu LM 35 Berbasis Microcontroller ATmega 8535 pada Sistem Pengontrolan Temperatur Air Laut Skala Kecil. Jurnal Rekayasa Mesin, 5 (2). pp. 183-192. ISSN 0216-468X

Monograph

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni (2021) Laporan Penelitian B60: Optimasi Performance Generator Sinkron Gerak Translasi Dan Rotasi Dengan Memanfaatkan Pembangkit Listrik Tenaga Gelombang Laut Menggunakan Mekanisme Pneumatik Untuk Masyarakat Nelayan Kota Bengkulu. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Witanto, Yovan and Indriani, Anizar and Hendra, Hendra (2019) Laporan Penelitian B57: Desain dan Manufaktur Mesin Pengontrol Kadar Amoniak, Salinitas dan Temperatur Air laut Terintegrasi Berbasis Mikrokontroler untuk budidaya Ikan Kerapu Menggunakan Energi Hybrid. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni (2019) Laporan Penelitian B58: Optimasi Performance Generator Sinkron Gerak Translasi Dan Rotasi Dengan Memanfaatkan Pembangkit Listrik Tenaga Gelombang Laut Menggunakan Mekanisme Pneumatik Untuk Masyarakat Nelayan Kota Bengkulu. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni (2018) Laporan Penelitian B55: Optimasi Desain Pembangkit Listrik Tenaga Gelombang Laut Menggunakan Mekanisme Pneumatik Dengan Variasi Torak Piston Dan Posisi Katup Buang Udara Untuk Masyarakat Nelayan Kota Bengkulu. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Witanto, Yovan and Indriani, Anizar and Hendra, Hendra (2017) Laporan Penelitian B51: Desain dan Manufaktur Mesin Pengontrol Kadar Amoniak, Salinitas dan Temperatur Air laut Terintegrasi Berbasis Mikrokontroler untuk budidaya Ikan Kerapu Menggunakan Energi Hybrid. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Hendra, Hendra and Syaiful, Muhammad and Indriani, Anizar (2016) Laporan Penelitian B49: Manufacturing Dan Assembly Mesin Pengering Rotari Untuk Proses Daur Ulang Limbah Cair Industri Kecil Dan Hasil Perkebunan. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni (2016) Laporan Penelitian B50: Optimasi Desain Pembangkit Listrik Tenaga Gelombang Laut Menggunakan Mekanisme Pneumatik Dengan Variasi Torak Piston Dan Posisi Katup Buang Udara Untuk Masyarakat Nelayan Kota Bengkulu. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Hendra, Hendra and Syaiful, Muhammad and Indriani, Anizar (2015) Laporan Penelitian B48: Manufacturing Dan Assembly Mesin Pengering Rotari Untuk Proses Daur Ulang Limbah Cair Industri Kecil Dan Hasil Perkebunan. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Hendra, Hendra and Syaiful, Muhammad and Indriani, Anizar (2014) Laporan Penelitian B47: Optimasi penempatan posisi generator pada turbin screw untuk pembangkit listrik tenaga mikrohidro. Project Report. LPPM UNIB, Universitas Bengkulu. (Unpublished)

Conference or Workshop Item

Hendra, Hendra and Suhartini, Yenni and Indriani, Anizar and Hanuary, FAD and Hernadewita, Hernadewita and Hardian, Frengki and Hermiyetti, Hermiyetti (2021) Pembuatan dan uji kerja generator AC gerak translasi dan rotasi untuk pembangkit listrik energi terbarukan. In: Prosiding Seminar Nasional, Seminar nasional Rekayasa apliaksi perancangan dan industri (RAPI) XX, 15-16 Desember 2021, UMS SOLO 2021.

Hendra, Hendra and Suhartini, Yenni and Indriani, Anizar and Hanuari, FAD and Hernadewita, Hernadewita and Hardian, Frengki and Hermiyetti, Hermiyetti (2021) Varying of Generator Design for Renewable Energy (Study Case for Ocean Wave Power Plant). In: The 8 International conference on engineering, Technology, and industrial application, 15-16 Desember 2021, UMS Surakarta.

Suhartini, Yenni and Indriani, Anizar and Hendra, Hendra and Rispandi, Rispandi and Hernadewita, Hernadewita (2020) Finite element method for stress analysis in the frame holder of generator translation and rotation motion on vertical direction mechanism for sea wave power plant. In: The 2nd International conference on mechanical engineering research and application, 7-8 Oktober 2020, Universitas Brawijaya Malang.

Indriani, Anizar and Suhartini, Yenni and Hendra, Hendra and Hernadewita, Hernadewita and Rispandi, Rispandi (2020) Performance of Generator Translation and Rotation Motion on Vertical Direction for Sea Wave Power Plant. In: Tarumanegara international conference on the applications of technology and engineering 2020, 3-4 Agustus 2020, Jakarta.

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni and Aswata, Aswata and Rispandi, Rispandi and Hernadewita, Hernadewita and Tanjung, Ariani (2020) Stress analysis on the frame holder of generator translation motion on horizontal direction for sea wave power plant using finite element method (FEM). In: International conference on advanced mechanical and industrial engineering 2020 (ICAMIE), 8 Juli 2020, Banten.

Hendra, Hendra and Syukriah, Syukriah and Silalahi, Maduma and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2018) Finite Element Method Analysis for Manufacturing Design Drum Dryer of Rotary Dryer Machine. In: 1st International conference industrial and manufacturing engineering 2018, 16 Oktober 2018, Medan.

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni and Tanjung, Ariani (2018) Performance of Generator Pneumatic for Power Plant of Ocean Wave. In: 1st International conference industrial and manufacturing engineering 2018, 16 Oktober 2018, Medan.

Hendra, Hendra and Julianto, Ade and Zuliantoni, Zuliantoni and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2018) Aplikasi Programmable Logic Control (PLC) menggunakan Ladder Program untuk Kontrol Komponen Gerak Mesin Pengering Karet. In: Seminar Nasional, Seminar nasional inovasi, teknologi dan aplikasi (SeNITIA) September 2018, 27 September 2018, Fakultas Teknik Universitas Bengkulu.

Hendra, Hendra and Yulianto, Ade and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Control system of rubber dryer machinery component using programable logic control (PLC). In: International conference on mechanical engineering and applied compiste materials (MEACM 2017) Hongkong, 23-24 November 2017, Hongkong.

Indriani, Anizar and Sitepu, Dimas and Hendra, Hendra (2017) Effect of Dimension and Shape of Magnet on the Performance AC Generator with Translation Motion. In: International conference on mechanical engineering and applied compiste materials (MEACM 2017), 23-24 November 2017, Hongkong.

Indriani, Anizar and Sitepu, Dimas and Hendra, Hendra (2017) Unjuk kerja generator sinkron dengan sistem translasi menggunakan variasi bentuk Magnet NdFeB Pembangkit Listrik Tenaga Gelombang Laut. In: Seminar nasional FORTEI 2017, 18-21 Oktober 2017, FORTEI 2017 Universitas Negeri Gorontalo.

Hendra, Hendra and Yulianto, Ade and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Desain sistem kontrol komponen mesin pengering karet menggunakan programmable logic control (PLC)/Development of Component Control System for Rubber Drying Machine Using Programmable Logic Controller. In: Seminar nasional tahunan Teknik Mesin (SNTTM) XVI Surabaya 2017, 5-6 Oktober 2017, ITS Surabaya.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Pembuatan produk komposit memanfaatkan limbah cair perkebunan dan industri/ Manufacture Process of Composite Products Made of Plantation and Industrial Wastewater. In: Seminar nasional tahunan Teknik Mesin (SNTTM) XVI Surabaya 2017, 5-6 Oktober 2017, ITS Surabaya.

Hendra, Hendra and Silalahi, Maduma and Indriani, Anizar and Syaiful, Muhammad and Hernadewita, Hernadewita (2016) Distribusi Temperatur Pada Desain dan Pemilihan Material Drum Pengering Mesin Pengering Rotary dryer Untuk Pengolahan Limbah Cair Menggunakan Finite Volume Method. In: Seminar nasional tahunan Teknik Mesin (SNTTM) XV Bandung 2016, 5-6 Oktober 2016, ITB Bandung.

Indriani, Anizar and Jonianto, Hasyim and Hendra, Hendra (2016) Optimasi Desain Piston Pembangkit Listrik Tenaga Gelombang Laut (PLTGL) Sistem Pneumatik untuk Output Daya Listrik. In: Seminar nasional tahunan Teknik Mesin (SNTTM) XV Bandung 2016, 5-6 Oktober 2016, ITB Bandung.

Hendra, Hendra and Indriani, Anizar and Syaiful, Muhammad and Atria, Atria (2014) Pemilihan Dimensi dan Jumlah Lilitan Kumparan Magnet Pada Generator Sinkron Untuk Pembangkit Listrik Tenaga Mikrohidro Menggunakan Turbin Screw. In: Seminar Nasional SNETE Unsyiah 2014, Aceh, 19 Agustus 2014, Unsyiah Aceh-Medan.

Indriani, Anizar and Hendra, Hendra and Witanto, Yovan and Johan, Johan and Siagian, Indra (2014) Assembly Sistem Kontrol Temperatur Air Laut Untuk Budidaya Ikan Kerapu Menggunakan Sensor LM 35 Berbasis Microcontroller ATmega 8535. In: Seminar Nasional SNETE, 19 Agustus 2014, Unsyiah Aceh-Medan.

Other

Hendra, Hendra and Suhartini, Yenni and Indriani, Anizar and Hernadewita, Hernadewita (2021) Korespondensi B36: Varying of Generator Design for Renewable Energy (Study Case for Ocean Wave Power Plant). AIP Proceeding.

Hendra, Hendra and Suhartini, Yenni and Indriani, Anizar and Hanuary, FAD and Hernadewita, Hernadewita and Hardian, Frengki and Hermiyetti, Hermiyetti (2021) Korespondensi B46: Pembuatan dan uji kerja generator AC gerak translasi dan rotasi untuk pembangkit listrik energi terbarukan. RAPI XX *niversitas Muhammadiyah Solo.

Hendra, Hendra and Suhartini, Yenni and Indriani, Anizar and Hanuary, FAD and Hernadewita, Hernadewita and Hardian, Frengki and Hermiyetti, Hermiyetti (2021) Similarity B36: Varying of Generator Design for Renewable Energy (Study Case for Ocean Wave Power Plant). AIP Proceeding.

Hendra, Hendra and Suhartini, Yenni and Indriani, Anizar and Hanuary, FAD and Hernadewita, Hernadewita and Hardian, Frengki and Hermiyetti, Hermiyetti (2021) Similarity B46: Pembuatan dan uji kerja generator AC gerak translasi dan rotasi untuk pembangkit listrik energi terbarukan. Universitas Muhammadiyah Solo.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Mardian, Andri and Kholik, Nurul and Rispandi, Rispandi and Suhartini, Yenni (2021) Similarity B13: Analisis tegangan pada struktur mesin pencacah plastik menggunakan metode elemen hingga (MEH) dan uji kerja mesin pencacah plastik. Jurusan Teknik Mesin Universitas Andalas.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Mardian, Andri and Kholik, Nurul and Rispandi, Rispandi and Suhartini, Yenni (2021) Korespondensi B13: Analisis tegangan pada struktur mesin pencacah plastik menggunakan metode elemen hingga (MEH) dan uji kerja mesin pencacah plastik. Jurusan Teknik Mesin Universitas Andalas.

Suhartini, Yenni and Indriani, Anizar and Hendra, Hendra and Hernadewita, Hernadewita and Rispandi, Rispandi (2020) Korespondensi B34: Finite element method for stress analysis in the frame holder of generator translation and rotation motion on vertical direction mechanism for sea wave power plant. IOP Series.

Suhartini, Yenni and Indriani, Anizar and Hendra, Hendra and Rispandi, Rispandi and Hernadewita, Hernadewita (2020) Similarity B34: Finite element method for stress analysis in the frame holder of generator translation and rotation motion on vertical direction mechanism for sea wave power plant. IOP Series.

Indriani, Anizar and Suhartini, Yenni and Hendra, Hendra and Hernadewita, Hernadewita and Rispandi, Rispandi (2020) Korespondensi B33: Performance of Generator Translation and Rotation Motion on Vertical Direction for Sea Wave Power Plant. IOP Series.

Indriani, Anizar and Suhartini, Yenni and Hendra, Hendra and Hernadewita, Hernadewita and Rispandi, Rispandi (2020) Similarity B33: Performance of Generator Translation and Rotation Motion on Vertical Direction for Sea Wave Power Plant. IOP Series.

Indriani, Anizar and Suhartini, Yenni and Aswata, Aswata and Rispandi, Rispandi and Hernadewita, Hernadewita and Tanjung, Ariani (2020) Korespondesi B31: Stress analysis on the frame holder of generator translation motion on horizontal direction for sea wave power plant using finite element method (FEM). IOP Series.

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni and Aswata, Aswata and Rispandi, Rispandi and Hernadewita, Hernadewita and Tanjung, Ariani (2020) Similarity B31: Stress analysis on the frame holder of generator translation motion on horizontal direction for sea wave power plant using finite element method (FEM). IOP Series.

Indriani, Anizar and Darmawan, Ija and Hernadewita, Hernadewita and Setyawan, Ari and Hendra, Hendra (2020) Korespondensi B8: Control Output of Generator Translation and Rotation using Buck Boost Converter for Swea Wave Power Plant. IAEME.

Indriani, Anizar and Darmawan, Ija and Hernadewita, Hernadewita and Setyawan, Ari and Hendra, Hendra (2020) Similarity B8: Control Output of Generator Translation and Rotation using Buck Boost Converter for Swea Wave Power Plant. IAEME.

Indriani, Anizar and Manurung, Gordon and Daratha, Novalio and Hendra, Hendra (2019) Korespondensi B21: Perancangan Turbin Sumbu Horizontal dan Sumbu Vertikal untuk Pembangkit Listrik Tenaga Angin (Studi Kasus di Kota Bengkulu). Program Studi Teknik Elektro Universitas Bengkulu.

Indriani, Anizar and Manurung, Gordon and Daratha, Novalio and Hendra, Hendra (2019) Similarity B21: Perancangan Turbin Sumbu Horizontal dan Sumbu Vertikal untuk Pembangkit Listrik Tenaga Angin (Studi Kasus di Kota Bengkulu). Program Studi Teknik Elektro Universitas Bengkulu.

Indriani, Anizar and Fajri, Marahalim and Hendra, Hendra and Witanto, Yovan (2019) Korespondensi B22: Kontrol Kualitas Kadar Air Laut Menggunakan Fuzzy Logic Untuk Habitat Ikan Kerapu. Jurusan Teknik Elektro Universitas Negeri Padang.

Indriani, Anizar and Julianto, Rifki and Hendra, Hendra and Tanjung, Ariani (2019) Korespondensi B23: Optimalisasi Performansi Generator Sinkron Gerak Translasi dan Rotasi pembangkit listrik tenaga gelombang laut. Jurusan Teknik Elektro Universitas Negeri Padang.

Indriani, Anizar and Fajri, Marahalim and Hendra, Hendra and Witanto, Yovan (2019) Similarity B22: Kontrol Kualitas Kadar Air Laut Menggunakan Fuzzy Logic Untuk Habitat Ikan Kerapu. Jurusan Teknik Elektro Universitas Negeri Padang.

Indriani, Anizar and Julianto, Rifki and Hendra, Hendra and Tanjung, Ariani (2019) Similarity B23: Optimalisasi Performansi Generator Sinkron Gerak Translasi dan Rotasi Pembangkit Listrik Tenaga Gelombang Laut. Jurusan Teknik Elektro Universitas Negeri Padang.

Hendra, Hendra and Syukriah, Syukriah and Silalahi, Maduma and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2018) Korespondensi B28: Finite Element Method Analysis for Manufacturing Design Drum Dryer of Rotary Dryer Machine. IOP Series.

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni and Tanjung, Ariani (2018) Korespondensi B29: Performance of Generator Pneumatic for Power Plant of Ocean Wave. IOP Series.

Hendra, Hendra and Syukriah, Syukriah and Silalahi, Maduma and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2018) Similarity B28: Finite Element Method Analysis for Manufacturing Design Drum Dryer of Rotary Dryer Machine. IOP Series.

Indriani, Anizar and Hendra, Hendra and Suhartini, Yenni and Tanjung, Ariani (2018) Similarity B29: Performance of Generator Pneumatic for Power Plant of Ocean Wave. IOP Series.

Hendra, Hendra and Yulianto, Ade and Zuliantoni, Zuliantoni and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2018) Korespondensi B44: Aplikasi Programmable Logic Control (PLC) menggunakan Ladder Program untuk Kontrol Komponen Gerak Mesin Pengering Karet. SeNitia Universitas Bengkulu.

Hendra, Hendra and Yulianto, Ade and Zuliantoni, Zuliantoni and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2018) Similarity B44: Aplikasi Programmable Logic Control (PLC) menggunakan Ladder Program untuk Kontrol Komponen Gerak Mesin Pengering Karet. Fakultas Teknik Universitas Bengkulu.

Indriani, Anizar and Dimas, Sitepu and Hendra, Hendra (2017) Korespondensi B26: Effect of Dimension and Shape of Magnet on the Performance AC Generator with Translation Motion. IOP Series.

Hendra, Hendra and Yulianto, Ade and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Korespondensi B27: Control system of rubber dryer machinery component using programable logic control (PLC). IOP Series.

Indriani, Anizar and Sitepu, Dimas and Hendra, Hendra (2017) Similarity B26: Effect of Dimension and Shape of Magnet on the Performance AC Generator with Translation Motion. IOP Series.

Hendra, Hendra and Yulianto, Ade and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Similarity B27: Control system of rubber dryer machinery component using programable logic control. IOP Series.

Indriani, Anizar and Dimas, Sitepu and Hendra, Hendra (2017) Similarity B43: Unjuk kerja generator sinkron dengan sistem translasi menggunakan variasi bentuk Magnet NdFeB Pembangkit Listrik Tenaga Gelombang Laut. Fortei-Universitas Negeri Gorontalo.

Hendra, Hendra and Yulianto, Ade and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Korespondensi B41: Desain sistem kontrol komponen mesin pengering karet menggunakan programmable logic control (PLC)/Development of Component Control System for Rubber Drying Machine Using Programmable Logic Controller. BKSTM-ITS Surabaya.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Korespondensi B42: Pembuatan produk komposit memanfaatkan limbah cair perkebunan dan industri/ Manufacture Process of Composite Products Made of Plantation and Industrial Wastewater. BKSTM-ITS Surabaya.

Hendra, Hendra and Yulianto, Ade and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Similarity B41: Desain sistem kontrol komponen mesin pengering karet menggunakan programmable logic control (PLC)/Development of Component Control System for Rubber Drying Machine Using Programmable Logic Controller. BKSTM-ITS Surabaya.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Hermiyetti, Hermiyetti (2017) Similarity B42: Pembuatan produk komposit memanfaatkan limbah cair perkebunan dan industri/ Manufacture Process of Composite Products Made of Plantation and Industrial Wastewater. BKSTM-ITS Surabaya.

Indriani, Anizar and Witanto, Yovan and Supriyadi, Supriyadi and Hendra, Hendra (2017) Similarity B20: Sistem Kontrol Kekeruhan dan Temperatur Air Laut menggunakan Microcontroller Arduino Mega. Jurusan Teknik Mesin Universitas Mercubuana Jakarta.

Indriani, Anizar and Jonianto, Hashim and Hendra, Hendra (2016) Korespondensi B39: Optimasi Desain Piston Pembangkit Listrik Tenaga Gelombang Laut (PLTGL) Sistem Pneumatik untuk Output Daya Listrik. BKSTM-ITB Bandung.

Hendra, Hendra and Silalahi, Maduma and Indriani, Anizar and Syaiful, Muhammad and Hernadewita, Hernadewita (2016) Korespondensi B40: Distribusi Temperatur pada Desain dan Pemilihan Material Drum Pengering Mesin Pengering Rotary dryer untuk Pengolahan Limbah Cair Menggunakan Finite Volume Method. BKSTM-ITB Bandung.

Indriani, Anizar and Jonianto, Hashim and Hendra, Hendra (2016) Similarity B39: Optimasi Desain Piston Pembangkit Listrik Tenaga Gelombang Laut (PLTGL) Sistem Pneumatik untuk Output Daya Listrik. BKSTM-ITB Bandung.

Hendra, Hendra and Silalahi, Maduma and Indriani, Anizar and Syaiful, Muhammad and Hernadewita, Hernadewita (2016) Similarity B40: Distribusi Temperatur pada Desain dan Pemilihan Material Drum Pengering Mesin Pengering Rotary dryer untuk Pengolahan Limbah Cair Menggunakan Finite Volume Method. BKSTM-ITB Bandung.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Yoserizal, Yoserizal (2016) Koresponden B1:Assembly Programmable Logic Control (PLC) in the Rotary Dryer Machine for Processing Waste Liquid System. Trans Tech Publications Ltd, Switzerland.

Indriani, Anizar and Hendra, Hendra and Witanto, Yovan (2016) Koresponden B2: Error of Assembly Microcontroller Arduino Mega and ATmega in the Control of Temperature for Heating and Cooling System. Trans Tech Publications Ltd, Switzerland.

Indriani, Anizar and Hendra, Hendra and Witanto, Yovan (2016) Similarity B2: Error of Assembly Microcontroller Arduino Mega and ATmega in the Control of Temperature for Heating and Cooling System. Trans Tech Publications Ltd, Switzerland.

Hendra, Hendra and Indriani, Anizar and Hernadewita, Hernadewita and Yoserizal, Yoserizal (2016) Similarity B1: Assembly Programmable Logic Control (PLC) in the Rotary Dryer Machine for Processing Waste Liquid System. Trans Tech Publication.

Hendra, Hendra and Syaiful, Muhammad and Indriani, Anizar and Atria, Atria (2014) Similarity B37: Pemilihan Dimensi dan Jumlah Lilitan Kumparan Magnet Pada Generator Sinkron Untuk Pembangkit Listrik Tenaga Mikrohidro Menggunakan Turbin Screw. SNETE-Universitas Udayana.

Indriani, Anizar and Hendra, Hendra and Siagian, Indra and Witanto, Yovan and Johan, Johan (2014) Similarity B38: Assembly Sistem Kontrol Temperatur Air Laut Untuk Budidaya Ikan Kerapu Menggunakan Sensor LM 35 Berbasis Microcontroller ATmega 8535. SNETE-Universitas Syiah kuala.

Indriani, Anizar and Johan, Johan and Witanto, Yovan and Hendra, Hendra (2014) Similarity B19: Pemanfaatan Sensor Suhu LM 35 Berbasis Microcontroller ATmega 8535 pada Sistem Pengontrolan Temperatur Air Laut Skala Kecil. Jurusan Teknik Mesin Universitas Brawijaya Malang.