Search for collections on EPrints Repository UNTIRTA

PENGARUH WAKTU PENGADUKAN DAN UKURAN FOAMING AGENT CaCO3 MENGGUNAKAN LIMBAH KULIT TELUR TERHADAP KEMAMPUAN ABSORBSI SUARA PADA ALUMINIUM FOAM

MAULANA, EDWIN (2025) PENGARUH WAKTU PENGADUKAN DAN UKURAN FOAMING AGENT CaCO3 MENGGUNAKAN LIMBAH KULIT TELUR TERHADAP KEMAMPUAN ABSORBSI SUARA PADA ALUMINIUM FOAM. S1 thesis, FAKULTAS TEKNIK UNIVERSITAS SULTAN AGENG TIRTAYASA.

[img] Text (01)
EDWIN MAULANA_3334190016_01.pdf
Restricted to Registered users only

Download (303kB) | Request a copy
[img] Text (02)
Edwin Maulana_3334190016_02.pdf
Restricted to Registered users only

Download (347kB) | Request a copy
[img] Text (03)
Edwin Maulana_3334190016_03.pdf
Restricted to Registered users only

Download (244kB) | Request a copy
[img] Text (04)
Edwin Maulana_3334190016_04.pdf
Restricted to Registered users only

Download (408kB) | Request a copy
[img] Text (05)
Edwin Maulana_3334190016_05.pdf
Restricted to Registered users only

Download (78kB) | Request a copy
[img] Text (Ref)
Edwin Maulana_3334190016_Ref.pdf
Restricted to Registered users only

Download (115kB) | Request a copy
[img] Text (Lamp)
Edwin Maulana_3334190016_Lamp.pdf
Restricted to Registered users only

Download (778kB) | Request a copy
[img] Text (CP)
Edwin Maulana_3334190016_CP.pdf
Restricted to Registered users only

Download (21MB) | Request a copy
[img] Text (Fulltext)
Edwin Maulana_3334190016_FullText.pdf
Restricted to Registered users only

Download (1MB) | Request a copy

Abstract

This study aims to determine the effect of variations in stirring time (30, 45, 60 seconds) and foaming agent size CaCO₃ (100#, 120#, 140#) from eggshell waste on the structure and sound dampening ability of aluminum foam. Foam was made by the melt route method at a temperature of 760°C using aluminum ADC12, CaCO₃ 3 wt% (calcined at 105°C), and Al₂O₃ 1.5 wt% as a viscosity stabilizer. The results showed that increasing stirring time reduced the pore size and increased the density, but decreased the porosity. At the size of 100#, the pores decreased from 0.777 mm (30 seconds) to 0.203 mm (60 seconds), the density increased from 0.12 to 0.18 g/cm³, and the porosity decreased from 95.6% to 93.4%. The 140# size shows a more stable structure. Acoustic tests using the Impedance Tube Testing method show that the 100#–60 second specimen has the best performance, with an average Transmission Loss value of 48.19 dB and a peak of 58 dB at a frequency of 125 Hz. In contrast, the 120# 60 second size shows a decrease in TL due to agglomeration. Overall, CaCO₃ from eggshells is effective as a foaming agent in producing aluminum foam with good sound damping capabilities.

Item Type: Thesis (S1)
Contributors:
ContributionContributorsNIP/NIM
Thesis advisorZULAIDA, YENI MURIANI197401032005012001
Thesis advisorSURYANA, SURYANA197402162001121001
Additional Information: Penelitian ini bertujuan mengetahui pengaruh variasi waktu pengadukan (30, 45, 60 detik) dan ukuran foaming agent CaCO₃ (100#, 120#, 140#) dari limbah kulit telur terhadap struktur dan kemampuan peredaman suara aluminium foam. Foam dibuat dengan metode melt route pada suhu 760°C menggunakan aluminium ADC12, CaCO₃ 3 wt% (dikalsinasi pada 105°C), dan Al₂O₃ 1,5 wt% sebagai penstabil viskositas. Hasil menunjukkan bahwa peningkatan waktu pengadukan memperkecil ukuran pori dan meningkatkan densitas, namun menurunkan porositas. Pada ukuran 100#, pori mengecil dari 0,777 mm (30 detik) menjadi 0,203 mm (60 detik), densitas naik dari 0,12 menjadi 0,18 g/cm³, dan porositas turun dari 95,6% ke 93,4%. Ukuran 140# menunjukkan struktur lebih stabil. Uji akustik dengan metode Impedance Tube Testing menunjukkan spesimen 100#–60 detik memiliki performa terbaik, dengan nilai Transmission Loss rata-rata 48,19 dB dan puncak 58 dB di frekuensi 125 Hz. Sebaliknya, ukuran 120# 60 detik menunjukkan penurunan TL akibat aglomerasi. Secara keseluruhan, CaCO₃ dari kulit telur efektif sebagai foaming agent dalam menghasilkan aluminium foam dengan kemampuan peredaman suara yang baik.
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Divisions: 03-Fakultas Teknik
03-Fakultas Teknik > 27201-Jurusan Teknik Metalurgi
Depositing User: mr Edwin Maulana
Date Deposited: 29 Jul 2025 08:45
Last Modified: 29 Jul 2025 08:45
URI: http://eprints.untirta.ac.id/id/eprint/53063

Actions (login required)

View Item View Item