BINTANG RAMADAN, PALENOV (2025) PENGARUH TEMPERATUR PEMANAS TERHADAP DIMENSI DAN MATERIAL DRUM PADA PERANCANGAN MESIN DRUM ROTARY DRYER PENGOLAAN LIMBAH CAIR DENGAN METODE ELEMEN HINGGA. S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.
![[img]](https://eprints.untirta.ac.id/style/images/fileicons/text.png) |
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_Fulltext.pdf Restricted to Registered users only Download (7MB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_01.pdf Restricted to Registered users only Download (2MB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_02.pdf Restricted to Registered users only Download (797kB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_03.pdf Restricted to Registered users only Download (831kB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_04.pdf Restricted to Registered users only Download (1MB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_05.pdf Restricted to Registered users only Download (529kB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_Ref.pdf Restricted to Registered users only Download (428kB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_Lamp.pdf Restricted to Registered users only Download (1MB) | Request a copy |
|
Text (SKRIPSI)
Palenov Bintang Ramadan_3331210078_CP.pdf Restricted to Registered users only Download (18MB) | Request a copy |
Abstract
The production of industrial products requires machines, motors, and others, which in turn need cooling and lubrication systems. After the lubricant is used, it will produce waste that is very hazardous to the environment, one of which is oil waste. To process oil waste into other products such as charcoal or raw material, a processing machine in the form of a rotary dryer is needed. The rotary dryer machine operates at a temperature suitable for the fluid or oil used. This research will involve the use of the finite element method and the use of Ansys static simulation software. The goal is to create a design for a rotary dryer drum that can be used for drying oil wastewater and is capable of withstanding high temperatures. Obtaining the maximum stress and displacement values from the design of the rotary dryer drum with variations in thickness and material. After conducting research on the optimum stress and deformation values for the rotary dryer machine material used in liquid waste processing, the chosen material is Low Alloy Steel 4140 Normalized at a temperature of 250℃. From the simulation results, the highest deformation values for each thickness variation were obtained, namely 0.62647 mm, 0.59032 mm, and 0.61004 mm. For the von Mises stress values from the simulation data, the maximum points achieved were 629.73, 548.32, and 580.68 N/mm² (MPa), with the von Mises stress values below the Tensile Yield Strength limit of 652 N/mm² (MPa)
| Item Type: | Thesis (S1) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Contributors: |
|
|||||||||
| Additional Information: | Pembuatan produk industri membutuhkan mesin dalam melakukan produksi, yang mana membutuhkan system pendingin dan pelumas. Setelah pelumas digunakan akan menghasilkan limbah yang sangat berbahaya bagi lingkungan salah satu nya limbah oli , Untuk mengolah limbah oli menjadi produk lain seperti arang atau row material dibutuhkan mesin pengolah berupa mesin rotary dryer. Mesin rotary dryer bekerja dengan temperature sesuai fluida atau cairan oli yang digunakan. Penelitian ini akan melibatkan penggunaan metode elemen hingga dan menggunakan software simulasi static ansys. Tujuan nya ialah untuk Membuat desain drum rotary dryer yang dapat digunakan untuk pengeringan limbah cair oli yang mampu menahan temperature tinggi. Mendapatkan nilai tegangan dan deformasi maximum dari desain drum rotary dryer dengan variasi tebal,temperature dan material. Setelah dilakukan penelitian untuk nilai tegangan dan deformasi yang optimum pada material mesin rotary dryer pengolah limbah cair, material yang di pilih adalah Low Alloy Steel 4140 Normalized pada temperature di 250℃. nilai Dari hasil simulasi tersebut didapat nilai deformasi tertinggi dari masing-masing variasi tebal yaitu 0,62647 mm , 0,59032 mm dan 0,61004 mm dan untuk nilai von mises stress Dari data simulasi nilai titik maksimum yang dicapai adalah 629,73 , 548,32 dan 580,68 N/mm² (MPa) dengan nilai von mises stress di bawah batas Tensile Yield Strength yaitu sebesar 652N/mm² (MPa) | |||||||||
| Subjects: | T Technology > TJ Mechanical engineering and machinery | |||||||||
| Divisions: | 03-Fakultas Teknik 03-Fakultas Teknik > 21201-Jurusan Teknik Mesin |
|||||||||
| Depositing User: | Mr Palenov Bintang Ramadan | |||||||||
| Date Deposited: | 17 Feb 2025 03:30 | |||||||||
| Last Modified: | 17 Feb 2025 03:30 | |||||||||
| URI: | http://eprints.untirta.ac.id/id/eprint/46995 |
Actions (login required)
 |
View Item |