eprintid: 52302
rev_number: 24
eprint_status: archive
userid: 17893
dir: disk0/00/05/23/02
datestamp: 2025-07-22 02:36:58
lastmod: 2025-07-22 02:36:58
status_changed: 2025-07-22 02:36:58
type: thesis
metadata_visibility: show
creators_name: DESVITA AULIA, DEA
creators_id: 3336210056
contributors_type: http://www.loc.gov/loc.terms/relators/THS
contributors_type: http://www.loc.gov/loc.terms/relators/THS
contributors_name: TWIDI BETHARY, RINDU
contributors_name: ESTI INTARI, DWI
contributors_id: 198212062010122001
contributors_id: 198601242014042001
corp_creators: UNIVERSITAS SULTAN AGENG TIRTAYASA
corp_creators: FAKULTAS TEKNIK
corp_creators: JURUSAN TEKNIK SIPIL
title: PEMANFAATAN LIMBAH POLYVIVNYL CHLORIDE (PVC) SEBAGAI FILLER PADA CAMPURAN ASPAL BETON LAPIS AUS (AC-WC) MENGGUNAKAN ASPAL MODIFIKASI POLIMER
ispublished: pub
subjects: T1
subjects: TA
subjects: TE
divisions: Sipil
full_text_status: restricted
keywords: PVC Powder, Asphalt Concrete Wearing Course, Polymer Asphalt, Marshall Test.
abstract: Road damage is often caused by heavy traffic loads, too high temperatures, and increasing vehicle volumes. This can be prevented by improving the quality of asphalt which acts as a binder for aggregates. PVC can be used as a filler in AC-WC mixes because it can increase the elasticity of asphalt and its resistance to water. This study discusses the effect of using PVC waste as filler in asphalt concrete wearing course (AC-WC) mixtures using polymer modified asphalt which aims to determine the characteristics of aggregate, asphalt, and PVC powder filler and to determine the effect of adding PVC powder waste to asphalt mixtures (AC-WC) as filler on marshall characteristics using polymer modified asphalt. The tests were conducted using the marshall testing method with variations in the planned asphalt content of 4.5%, 5%, 5.5%, 6%, 6.5% and variations in the addition of PVC powder 0%, 3%, 6% and 9% of the filler weight percentage. The results showed that the stability value of the mixture increased until it reached the optimum point at 6% PVC powder content with 6.5% asphalt content. The flow value of the mixture with added PVC powder was lower than the mixture without added PVC powder. This shows that the addition of PVC powder as filler can increase the stability and durability of asphalt in resisting traffic load and permanent deformation.
date: 2025-07-21
date_type: published
pages: 104
institution: Fakultas Teknik Universitas Sultan Ageng Tirtayasa
department: TEKNIK SIPIL
thesis_type: sarjana
thesis_name: sarjana
related_url_url: https://eprints.untirta.ac.id/id/eprint/52303
citation:   DESVITA AULIA, DEA  (2025) PEMANFAATAN LIMBAH POLYVIVNYL CHLORIDE (PVC) SEBAGAI FILLER PADA CAMPURAN ASPAL BETON LAPIS AUS (AC-WC) MENGGUNAKAN ASPAL MODIFIKASI POLIMER.  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.   
document_url: https://eprints.untirta.ac.id/52302/1/Dea%20Desvita%20Aulia_3336210056_Fulltext.pdf
document_url: https://eprints.untirta.ac.id/52302/2/Dea%20Desvita%20Aulia_3336210056_01.pdf
document_url: https://eprints.untirta.ac.id/52302/3/Dea%20Desvita%20Aulia_3336210056_02.pdf
document_url: https://eprints.untirta.ac.id/52302/4/Dea%20Desvita%20Aulia_3336210056_03.pdf
document_url: https://eprints.untirta.ac.id/52302/5/Dea%20Desvita%20Aulia_3336210056_04.pdf
document_url: https://eprints.untirta.ac.id/52302/6/Dea%20Desvita%20Aulia_3336210056_05.pdf
document_url: https://eprints.untirta.ac.id/52302/7/Dea%20Desvita%20Aulia_3336210056_06.pdf
document_url: https://eprints.untirta.ac.id/52302/8/Dea%20Desvita%20Aulia_3336210056_Ref.pdf
document_url: https://eprints.untirta.ac.id/52302/9/Dea%20Desvita%20Aulia_3336210056_Lamp.pdf
document_url: https://eprints.untirta.ac.id/52302/10/Dea%20Desvita%20Aulia_3336210056_CP.pdf