eprintid: 51838
rev_number: 19
eprint_status: archive
userid: 12632
dir: disk0/00/05/18/38
datestamp: 2025-07-16 09:08:00
lastmod: 2025-07-16 09:08:00
status_changed: 2025-07-16 09:08:00
type: thesis
metadata_visibility: show
creators_name: AKBAR, DIAZ PRISKI
creators_id: 3331210014
contributors_type: http://www.loc.gov/loc.terms/relators/THS
contributors_name: SUSILO, SIDIK
contributors_name: SUPRAYOGI, DEDY TRIAWAN
contributors_id: 198806052019031006
contributors_id: 198206212022031001
corp_creators: UNIVERSITAS SULTAN AGENG TIRTAYASA
corp_creators: FAKULTAS TEKNIK
corp_creators: JURUSAN TEKNIK MESIN
title: PENGARUH UNBALANCE PADA MESIN BEPUTAR TERHADAP PENGUKURAN GETARAN: MENGGUNAKAN ALAT MODAL ANALYSIS TESTING DAN VIBRATION METER
ispublished: pub
subjects: Q1
subjects: QA76
subjects: TJ
divisions: Mesin
full_text_status: public
keywords: Frekuensi, Modal Analysis, Mesin Beputar, Vibration Meter
note: Penelitian ini menggunakan metode eksperimental untuk menganalisis pengaruh variasi pembebanan terhadap getaran mesin berputar. Pengujian dilakukan pada motor listrik dengan cakram yang dibebani baut, serta pengukuran dilakukan menggunakan dua metode: Modal Analysis Testing (Simcenter Testlab) dan Vibration Meter. Data yang diperoleh mencakup akselerasi, velocity, dan frekuensi di tiga titik pengukuran dan tiga variasi kecepatan putar. Hasil penelitian menunjukkan bahwa peningkatan beban meningkatkan nilai getaran, serta Modal Analysis memiliki tingkat akurasi lebih tinggi dibanding Vibration Meter.
abstract: Penelitian ini dilatarbelakangi oleh pentingnya pemahaman terhadap respon dinamis mesin berputar akibat variasi pembebanan, yang dapat memengaruhi kestabilan dan umur pakai mesin. Objek kerja berupa motor listrik dengan cakram rem yang dibebani baut sebesar 0.205 N, 0.402 N, dan 0.598 N, diuji pada tiga titik (V1, V2, V3) dan tiga kecepatan rotasi (1500, 1700, 1900 RPM) menggunakan dua metode, yaitu Modal Analysis Testing dengan sistem SCADAS dan Simcenter Testlab, serta Vibration Meter secara langsung. Tujuan penelitian ini adalah untuk menganalisis pengaruh variasi beban terhadap respon getaran mesin serta membandingkan akurasi kedua metode pengukuran. Manfaat yang diperoleh dari penelitian ini antara lain memberikan pemahaman lebih mendalam mengenai karakteristik getaran akibat beban tidak seimbang, serta menentukan metode pengukuran yang lebih akurat dan efisien untuk diterapkan dalam pemeliharaan dan pemantauan kondisi mesin berputar.
date: 2024-07-16
date_type: published
pages: 124
institution: Fakultas Teknik Universitas Sultan Ageng Tirtayasa
department: TEKNIK MESIN
thesis_type: sarjana
thesis_name: sarjana
referencetext: [1]	A. Choudhury, “Vibration Monitoring of Rotating Electrical Machines,” 2019, pp. 163–188. doi: 10.4018/978-1-5225-6989-3.ch008.
[2]	I. M. Hermanto, Nurhayati, I. Tahir, and M. Yunus, “Penerapan Model Guided Context-and Problem-Based Learning Untuk Meningkatkan Pemahaman Konsep Pada Materi Gelombang Bunyi,” JPF (Jurnal Pendidik. Fis. Univ. Islam Negeri Alauddin Makassar, vol. 11, no. 1, pp. 151–162, Mar. 2023, doi: 10.24252/jpf.v11i1.36233.
[3]	K. Xie and L. Cheng, “A novel two-dimensional Hilbert transform method for structural vibration measurement and Modal Analysis,” Mech. Syst. Signal Process., vol. 225, p. 112324, Feb. 2025, doi: 10.1016/j.ymssp.2025.112324.
[4]	A. Nandi and H. Ahmed, “Principles of Rotating Machine Vibration Signals,” in Condition Monitoring with Vibration Signals, Wiley, 2019, pp. 17–30. doi: 10.1002/9781119544678.ch2.
[5]	S. P. Mogal and D. I. Lalwani, “A Brief Review on Fault Diagnosis of Rotating Machineries,” Appl. Mech. Mater., vol. 541–542, pp. 635–640, Mar. 2014, doi: 10.4028/www.scientific.net/AMM.541-542.635.
[6]	F. Al-Badour, M. Sunar, and L. Cheded, “Vibration analysis of rotating machinery using time–frequency analysis and wavelet techniques,” Mech. Syst. Signal Process., vol. 25, no. 6, pp. 2083–2101, Aug. 2011, doi: 10.1016/j.ymssp.2011.01.017.
[7]	A. K. Chopra, “Dynamics of structures: theory and applications to earthquake engineering,” Choice Rev. Online, vol. 33, no. 02, pp. 33-0948-33–0948, Oct. 1995, doi: 10.5860/CHOICE.33-0948.
[8]	K. Zhang and X. Jiang, “improved OAKR approach to condition monitoring of rotating machinery,” PHM Soc. Asia-Pacific Conf., vol. 4, no. 1, Sep. 2023, doi: 10.36001/phmap.2023.v4i1.3600.
[9]	D. Suryadi and M. D. Pratama, “Desain dan Pembuatan Alat Monitoring Kerusakan Mesin Berdasarkan Level Getaran,” J. Rekayasa Mesin, vol. 11, no. 1, pp. 21–29, May 2020, doi: 10.21776/ub.jrm.2020.011.01.3.
[10]	A. Kafeel et al., “An Expert System for Rotating Machine Fault Detection Using Vibration Signal Analysis,” Sensors, vol. 21, no. 22, p. 7587, Nov. 2021, doi: 10.3390/s21227587.
[11]	A. Mauricio, D. Helm, M. Timusk, J. Antoni, and K. Gryllias, “Novel Cyclo-Nonstationary Indicators for Monitoring of Rotating Machinery Operating Under Speed and Load Varying Conditions,” J. Eng. Gas Turbines Power, vol. 144, no. 4, Apr. 2022, doi: 10.1115/1.4049778.
[12]	G. W. P. Rodrigues, P. C. Büchner, J. L. de A. Soares, A. M. Reis, C. L. da Silva, and N. R. Horikawa, “Control of vibrations in rotating mechanical elements,” Sci. Electron. Arch., vol. 16, no. 12, Nov. 2023, doi: 10.36560/161220231827.
[13]	A. Ermolaev, B. Gordeev, S. Okhulkov, G. Panovko, and A. Plekhov, “Measuring of rotating shafts angular deformation by means of ultrasonic Vibration Meter,” J. Meas. Eng., vol. 11, no. 1, pp. 51–61, Mar. 2023, doi: 10.21595/jme.2022.22919.
[14]	G. Storti and T. Machado, “The use of operational Modal Analysis in the process of modal parameters identification in a rotating machine supported by roller bearings,” J. Mech. Sci. Technol., vol. 35, no. 2, pp. 471–480, 2021, doi: 10.1007/s12206-021-0105-3.
[15]	G. Sternharz and T. Kalganova, “Current Methods for Operational Modal Analysis of Rotating Machinery and Prospects of Machine Learning,” 2020, pp. 155–163. doi: 10.1007/978-3-030-47721-9_19.
[16]	Y. Guo, L. Chen, Y. Long, and X. Zhang, “Digital Simulation of Coupled Dynamic Characteristics of Open Rotor and Dynamic Balancing Test Research,” Machines, vol. 12, no. 6, p. 391, Jun. 2024, doi: 10.3390/machines12060391.
[17]	X. Zhou, X. Wang, H. Wang, Z. Xing, Z. Yang, and L. Cao, “Method for Denoising the Vibration Signal of Rotating Machinery through VMD and MODWPT,” Sensors, vol. 23, no. 15, p. 6904, Aug. 2023, doi: 10.3390/s23156904.
[18]	S. Felahi and W. Mohamedi, “Order Analysis of a Vibration Signal of a Rotating Machine,” J. Biosens. Bioelectron. Res., pp. 1–7, Apr. 2024, doi: 10.47363/JBBER/2024(2)114.
[19]	L. Wang, Z. Wu, H. Wu, X. Yang, and Y. Xie, “An adaptive fault diagnosis method for rotating machinery based on GCN deep feature extraction and OptGB,” Nov. 19, 2024. doi: 10.21203/rs.3.rs-5004157/v1.
[20]	K. Aminu, B. D. Halilu, D. Y. Dabs, M. Sule, and S. U. Ibrahim, “Fault Identification on a Bearing Component of a Rotating Machine Using Vibration Spectrum Analysis,” Int. J. Adv. Sci. Res. Eng., vol. 07, no. 09, pp. 37–42, 2021, doi: 10.31695/IJASRE.2021.34059.
[21]	R. Shankar, Fundamentals of Physics. 2017. doi: 10.12987/9780300206791.
[22]	I. Bagri, K. Tahiry, A. Hraiba, A. Touil, and A. Mousrij, “Vibration Signal Analysis for Intelligent Rotating Machinery Diagnosis and Prognosis: A Comprehensive Systematic Literature Review,” Vibration, vol. 7, no. 4, pp. 1013–1062, Oct. 2024, doi: 10.3390/vibration7040054.
[23]	L. Lyu and W. Zhu, “Operational Modal Analysis of a Rotating Structure Using a Novel Image-Based Long-Range Continuously Scanning Laser Doppler Vibrometer,” Vol. 11 36th Conf. Mech. Vib. Sound, Aug. 2024, doi: 10.1115/DETC2024-144048.
[24]	N. R. Dreher, G. C. Storti, and T. H. Machado, “Vibration Signal Evaluation Based on K-Means Clustering as a Pre-Stage of Operational Modal Analysis for Structural Health Monitoring of Rotating Machines,” Energies, vol. 16, no. 23, 2023, doi: 10.3390/en16237848.
[25]	D. Goto, T. Inoue, S. Kimura, A. Heya, S. Nakamura, and Y. Watanabe, “An Extended Operational Modal Analysis Method Enabling the Separation of Whirling Direction Information in Rotating Machinery (Full Operational Modal Analysis Method),” J. Vib. Acoust., vol. 147, no. 1, Feb. 2025, doi: 10.1115/1.4067289.
citation:   AKBAR, DIAZ PRISKI  (2024) PENGARUH UNBALANCE PADA MESIN BEPUTAR TERHADAP PENGUKURAN GETARAN: MENGGUNAKAN ALAT MODAL ANALYSIS TESTING DAN VIBRATION METER.  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.   
document_url: https://eprints.untirta.ac.id/51838/1/Diaz%20Priski%20Akbar_3331210014_Fulltext.pdf
document_url: https://eprints.untirta.ac.id/51838/2/Diaz%20Priski%20Akbar_3331210014_01.pdf
document_url: https://eprints.untirta.ac.id/51838/3/Diaz%20Priski%20Akbar_3331210014_02.pdf
document_url: https://eprints.untirta.ac.id/51838/4/Diaz%20Priski%20Akbar_3331210014_03.pdf
document_url: https://eprints.untirta.ac.id/51838/5/Diaz%20Priski%20Akbar_3331210014_04.pdf
document_url: https://eprints.untirta.ac.id/51838/6/Diaz%20Priski%20Akbar_3331210014_05.pdf
document_url: https://eprints.untirta.ac.id/51838/7/Diaz%20Priski%20Akbar_3331210014_Ref.pdf
document_url: https://eprints.untirta.ac.id/51838/8/Diaz%20Priski%20Akbar_3331210014_Lamp.pdf
document_url: https://eprints.untirta.ac.id/51838/9/Diaz%20Priski%20Akbar_3331210014_CP.pdf