relation: https://eprints.untirta.ac.id/49808/
title: PENGARUH PENAMBAHAN MAGNESIUM DENGAN VARIASI SUHU HOMOGENISASI TERHADAP SIFAT MEKANIK DAN STRUKTUR MIKRO PADUAN ALUMINIUM SERI 5   DARI VELG BEKAS
creator: RAYHAN CHANDRA WIBISETYO, MUHAMAD
subject: TS Manufactures
description: Aluminum metal has advantages such as good corrosion resistance, good mechanical strength, and good conductivity, and is also considered a light metal. Al-Mg alloy is one of the alloys that can be used in car component applications, because this alloy has interannealing ability, weldability and high strength after forming. The addition of more than 5% of the magnesium element to casting products in a suitable aluminum-silicon alloy can increase the mechanical strength   of the alloy. One of the methods used in this research is die casting which will later be processed by hot rolling. In this research, variables were used in the form of the addition of magnesium elements and homogenization temperature. The addition of magnesium elements used in this research was 3%, 5% and 7%. The results of this research show that the addition of the magnesium element increases the tensile   strength value because increasing the Mg content can increase the hardening of the solid solution and improve the mechanical properties up to a certain point, and variations in homogenization temperature show that the greater the temperature used, namely 350°C, 400°C, and 450°C, causes a decrease in the tensile strength value because the homogenization temperature can accelerate atomic diffusion and cause Mg atoms to come out of the solid solution and form intermetallic phase precipitates and will form a brittle phase such as Al₃Mg₂
date: 2025-06-13
type: Thesis
type: NonPeerReviewed
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/19/M%20Rayhan%20Chandra%20W_3334200105_Fulltext.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/18/M%20Rayhan%20Chandra%20W_3334200105_01.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/3/M%20Rayhan%20Chandra%20W_3334200105_02.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/4/M%20Rayhan%20Chandra%20W_3334200105_03.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/5/M%20Rayhan%20Chandra%20W_3334200105_04.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/6/M%20Rayhan%20Chandra%20W_3334200105_05.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/7/M%20Rayhan%20Chandra%20W_3334200105_Ref.pdf.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/49808/8/M%20Rayhan%20Chandra%20W_3334200105_Lamp.pdf.pdf
identifier:   RAYHAN CHANDRA WIBISETYO, MUHAMAD  (2025) PENGARUH PENAMBAHAN MAGNESIUM DENGAN VARIASI SUHU HOMOGENISASI TERHADAP SIFAT MEKANIK DAN STRUKTUR MIKRO PADUAN ALUMINIUM SERI 5 DARI VELG BEKAS.  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.