relation: https://eprints.untirta.ac.id/46995/
title: PENGARUH TEMPERATUR PEMANAS TERHADAP  DIMENSI DAN MATERIAL DRUM PADA PERANCANGAN  MESIN DRUM ROTARY DRYER PENGOLAAN LIMBAH  CAIR DENGAN METODE ELEMEN HINGGA
creator: BINTANG RAMADAN, PALENOV
subject: TJ Mechanical engineering and machinery
description: The production of industrial products requires machines, motors, and others, which in turn need cooling and lubrication systems. After the lubricant is used, it will  produce waste that is very hazardous to the environment, one of which is oil waste. To process oil waste into other products such as charcoal or raw material, a processing machine in the form of a rotary dryer is needed. The rotary dryer machine operates at a temperature suitable for the fluid or oil used. This research will involve the use of the finite element method and the use of Ansys static simulation software. The goal is to create a design for a rotary dryer drum that can be used for drying oil wastewater and is capable of withstanding high temperatures. Obtaining the maximum stress and displacement values from the design of the rotary dryer drum with variations in thickness and material. After conducting research on the optimum stress and deformation values for the rotary dryer machine  material used in liquid waste processing, the chosen material is Low Alloy Steel 4140 Normalized at a temperature of 250℃. From the simulation results, the highest deformation values for each thickness variation were obtained, namely 0.62647 mm, 0.59032 mm, and 0.61004 mm. For the von Mises stress values from the simulation data, the maximum points achieved were 629.73, 548.32, and 580.68 N/mm² (MPa), with the von Mises stress values below the Tensile Yield Strength limit of 652 N/mm² (MPa)
date: 2025-02-17
type: Thesis
type: NonPeerReviewed
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/7/Palenov%20Bintang%20Ramadan_3331210078_Fulltext.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/1/Palenov%20Bintang%20Ramadan_3331210078_01.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/3/Palenov%20Bintang%20Ramadan_3331210078_02.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/2/Palenov%20Bintang%20Ramadan_3331210078_03.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/4/Palenov%20Bintang%20Ramadan_3331210078_04.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/5/Palenov%20Bintang%20Ramadan_3331210078_05.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/6/Palenov%20Bintang%20Ramadan_3331210078_Ref.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/9/Palenov%20Bintang%20Ramadan_3331210078_Lamp.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/46995/8/Palenov%20Bintang%20Ramadan_3331210078_CP.pdf
identifier:   BINTANG RAMADAN, PALENOV  (2025) PENGARUH TEMPERATUR PEMANAS TERHADAP DIMENSI DAN MATERIAL DRUM PADA PERANCANGAN MESIN DRUM ROTARY DRYER PENGOLAAN LIMBAH CAIR DENGAN METODE ELEMEN HINGGA.  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.