eprintid: 46018
rev_number: 16
eprint_status: archive
userid: 14412
dir: disk0/00/04/60/18
datestamp: 2025-02-04 12:33:47
lastmod: 2025-02-04 12:33:47
status_changed: 2025-02-04 12:33:47
type: thesis
metadata_visibility: show
creators_name: Ramadhan, Miftah Hadi
creators_id: 3331200064
contributors_type: http://www.loc.gov/loc.terms/relators/THS
contributors_type: http://www.loc.gov/loc.terms/relators/THS
contributors_name: SUNARDI, SUNARDI
contributors_name: ULA, SHOFIATUL
contributors_id: 197312052006041002
contributors_id: 198403132019032009
corp_creators: UNIVERSITAS SULTAN AGENG TIRTAYASA
corp_creators: FAKULTAS TEKNIK
corp_creators: JURUSAN TEKNIK MESIN
title: STUDI RASIO PARTIKEL BAMBU DAN PELEPAH KELAPA SAWIT SEBAGAI FILLER HYBRID PADA PAPAN PARTIKEL
ispublished: pub
subjects: TJ
divisions: FT
divisions: Mesin
full_text_status: restricted
note: Penelitian ini bertujuan untuk mengetahui rasio partikel bambu dan pelepah kelapa sawit sebagai filler hybrid terhadap kinerja papan partikel. Penelitian dilakukan di COE 2, lantai 3 Fakultas Teknik Universitas Sultan Ageng Tirtayasa. Analisis dilakukan dengan menggunakan metode statistik dan mencakup tiga sampel: pelepah kelapa sawit sebagai filler (A), campuran pelepah kelapa sawit dan bambu (B), dan bambu (C). Hasil penelitian menunjukkan bahwa pada pengujian fisis, penggunaan campuran pelepah kelapa sawit dan bambu sebagai filler mempengaruhi nilai densitas sehingga mencapai 0,879 g/cm³. Sebaliknya, penggunaan filler bambu mempengaruhi kadar air (12,4%), pengembangan tebal (9,2%), dan persentase serapan air (13,7%). Pada pengujian mekanis, filler bambu mempengaruhi nilai kekuatan lentur mencapai 133,86 kgf/cm², sedangkan filler campuran pelepah kelapa sawit dan bambu mempengaruhi nilai Modulus of Elasticity (MOE), mencapai 19855,01 kgf/cm².
abstract: This study aims to determine the ratio of bamboo particles and palm fronds as a hybrid filler to the performance of particle boards. The research was conducted at COE 2, 3rd floor of the Faculty of Engineering, Sultan Ageng Tirtayasa University. The analysis was carried out using statistical methods and included three samples: oil palm fronds as filler (A), a mixture of palm fronds and bamboo (B), and bamboo (C). The results showed that in the physical test, the use of a mixture of palm fronds and bamboo as fillers affected the density value so that it reached 0.879 g/cm³. In contrast, the use of bamboo filler affected moisture content (12.4%), thickening development (9.2%), and water absorption percentage (13.7%). In mechanical testing, bamboo filler affects the bending strength value to reach 133.86 kgf/cm², while the filler mixed with palm frond and bamboo affects the Modulus of Elasticity (MOE) value, reaching 19855.01 kgf/cm².
date: 2025-02-04
date_type: published
pages: 69
institution: Fakultas Teknik Universitas Sultan Ageng Tirtayasa
department: TEKNIK MESIN
thesis_type: sarjana
thesis_name: sarjana
citation:   Ramadhan, Miftah Hadi  (2025) STUDI RASIO PARTIKEL BAMBU DAN PELEPAH KELAPA SAWIT SEBAGAI FILLER HYBRID PADA PAPAN PARTIKEL.  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.   
document_url: https://eprints.untirta.ac.id/46018/1/Miftah%20Hadi%20Ramadhan_3331200064_Fulltext.pdf
document_url: https://eprints.untirta.ac.id/46018/2/Miftah%20Hadi%20Ramadhan_3331200064_CP.pdf
document_url: https://eprints.untirta.ac.id/46018/3/Miftah%20Hadi%20Ramadhan_3331200064_01.pdf
document_url: https://eprints.untirta.ac.id/46018/4/Miftah%20Hadi%20Ramadhan_3331200064_02.pdf
document_url: https://eprints.untirta.ac.id/46018/5/Miftah%20Hadi%20Ramadhan_3331200064_03.pdf
document_url: https://eprints.untirta.ac.id/46018/6/Miftah%20Hadi%20Ramadhan_3331200064_04.pdf
document_url: https://eprints.untirta.ac.id/46018/7/Miftah%20Hadi%20Ramadhan_3331200064_05.pdf
document_url: https://eprints.untirta.ac.id/46018/8/Miftah%20Hadi%20Ramadhan_3331200064_Ref.pdf
document_url: https://eprints.untirta.ac.id/46018/9/Miftah%20Hadi%20Ramadhan_3331200064_Lamp.pdf