relation: https://eprints.untirta.ac.id/45970/
title: PIROLISIS CAMPURAN LIMBAH PLASTIK PP DAN PE  MENGGUNAKAN KATALIS FCC JENIS SPENT (SPENT CAT)
creator: Dwiraharja, M. Akbar
creator: Nuari, Joan Adheisa
subject: Q Science (General)
subject: QD Chemistry
subject: T Technology (General)
subject: TP Chemical technology
description: Pyrolysis is one of the methods in processing plastic waste that can be converted into fuel oil. The purpose of this study is to determine the effect of PP and PE plastic mixture ratio and catalyst ratio on the quality and quantity of pyrolysis oil products. After that, the resulting pyrolysis oil product is analyzed for its economic feasibility. The pyrolysis method in this study was carried out at 350°C for 60 minutes by varying the mixture of PP and PE plastic in 500 grams, namely 1:1, 2:1, and 3:1 and varying the ratio of the addition of spent catalyst FCC as much as 5%, 10%, and 15%wt to the mixture of PP and PE plastic. The pyrolysis oil product was tested for viscosity, density, and GC-MS. This research was conducted at Pertamina Technology Innovation (TI) Building 5. The results obtained in this study are in the variation of the best mixture of PP and PE plastics by producing a lot of pyrolysis oil products at a ratio of 3: 1 at 81.56%wt while in the variation of the ratio of the addition of spent catalyst FCC with a mixture of PP and PE plastics 3: 1 the best quality of oil products is in the addition of 15%wt catalyst while the largest quantity of oil is in the addition of 10%wt catalyst which is 81.56%wt. The viscosity and density values obtained were not much different at 1.27 - 1.31 cSt and 0.769 - 0.770 g/cm3, respectively. Based on economic analysis, the pyrolysis oil product produced is not economical because the operational cost is more expensive than the selling price of the product.
date: 2024-02-03
type: Thesis
type: NonPeerReviewed
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/1/M.%20Akbar%20Dwiraharja_3335200034_Fulltext.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/2/M.%20Akbar%20Dwiraharja_3335200034_01.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/3/M.%20Akbar%20Dwiraharja_3335200034_02.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/4/M.%20Akbar%20Dwiraharja_3335200034_03.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/5/M%2C%20Akbar%20Dwiraharja_3335200034_04.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/6/M.%20Akbar%20Dwiraharja_3335200034_05.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/7/M.%20Akbar%20Dwiraharja_3335200034_Ref.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/45970/8/M.%20Akbar%20Dwiraharja_3335200034_Lamp.pdf
identifier:   Dwiraharja, M. Akbar and Nuari, Joan Adheisa  (2024) PIROLISIS CAMPURAN LIMBAH PLASTIK PP DAN PE MENGGUNAKAN KATALIS FCC JENIS SPENT (SPENT CAT).  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.