relation: https://eprints.untirta.ac.id/44069/
title: PENGARUH PENGUAT SiC TERHADAP KARAKTERISTIK   KOMPOSIT Al 6061 HASIL PROSES THIXOFORMING
creator: Naufal Hanif, Muhammad
subject: TJ Mechanical engineering and machinery
description: Research and development in composite materials have been rapidly advancing,  driven by the need for stronger, lighter, and more energy-efficient materials. The  Thixoforming process is a manufacturing technique that involves using the material in a  semi-solid state, where it has the right viscosity for forming, which is between a solid and  liquid state.  In this study, the author conducts an experimental study on the fabrication of Al  6061 composite reinforced with Silicon Carbide (SiC) using the Thixoforming method.  The objective is to understand the fabrication process of composite materials, with the  main focus being the Thixoforming method, and to analyze the results of microstructure  tests, hardness, and impact properties to observe the effect of SiC reinforcement on the  mechanical properties of Al-SiC composites.  In the final stage of testing the Al-SiC composite, the results showed that the  mechanical properties improved, with hardness increasing as the SiC content increased.  First, the impact test results showed an increase in value with each specimen variation:  0.0226 J/mm² for the first variation, 0.0230 J/mm² for the second variation, and 0.0453  J/mm² for the third variation. The hardness test results also increased: 11.9 for the first  variation, 25.5 for the second variation, and 33.1 for the third variation. The SEM analysis  results were consistent with the author’s hypothesis, where the first variation showed the  least amount of SiC particles, corresponding to its lowest SiC content of 5%. The third  variation showed the highest amount of SiC, and the second variation was in between the  first and third
date: 2024
type: Thesis
type: NonPeerReviewed
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/11/M%20Naufal%20Hanif_3331200088_Fulltext.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/3/M%20Naufal%20Hanif_3331200088_02.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/4/M%20Naufal%20Hanif_3331200088_03.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/5/M%20Naufal%20Hanif_3331200088_04.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/6/M%20Naufal%20Hanif_3331200088_05.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/7/M%20Naufal%20Hanif_3331200088_Ref.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/8/M%20Naufal%20Hanif_3331200088_Lamp.pdf
format: text
language: id
identifier: https://eprints.untirta.ac.id/44069/9/M%20Naufal%20Hanif_3331200088_CP.pdf
format: text
language: en
identifier: https://eprints.untirta.ac.id/44069/12/M%20Naufal%20Hanif_3331200088_01.pdf
identifier:   Naufal Hanif, Muhammad  (2024) PENGARUH PENGUAT SiC TERHADAP KARAKTERISTIK KOMPOSIT Al 6061 HASIL PROSES THIXOFORMING.  S1 thesis, Fakultas Teknik Universitas Sultan Ageng Tirtayasa.