Search for collections on EPrints Repository UNTIRTA

Effect of Alum Dose in the Coagulation Process for Decreasing the Pollutant in the Palm Oil Mill Effluent: Experimental and Kinetic Analysis

Syaichurrozi, Iqbal and Jayanudin, Jayanudin and Sari, Listiyani Nurwindya and Apriantika, Anellysha Putri (2022) Effect of Alum Dose in the Coagulation Process for Decreasing the Pollutant in the Palm Oil Mill Effluent: Experimental and Kinetic Analysis. Eksergi, 19 (3). pp. 91-96. ISSN 2460-8203

[img] Text
Effect of Alum Dose in the Coagulation Process for Decreasing the Pollutant in the Palm Oil.pdf - Published Version

Download (381kB)
[img] Text
Cek Turnitin_Effect of Alum Dose in the Coagulation Process for Decreasing the Pollutant in the Palm Oil Mill Effluent_ Experimen.pdf - Other

Download (1MB)
[img] Text
Bukti Korespondensi.pdf - Other

Download (366kB)

Abstract

Palm oil mill effluent (POME) is palm oil processing industrial waste that cannot be discharged directly into water bodies. Therefore, this waste must be treated. One method that can be used to treat it is coagulation. The purpose of this study was to investigate the effect of coagulant doses on the coagulation process for treating the POME through experimental and kinetic analysis. The alum dose was varied to 1, 3, 5, 10, 15 g/L. The volume of treated waste was 1 L. Before adding alum, the pH of POME was adjusted to 7.0 with the addition of technical grade NaOH. The coagulation process was carried out for 180 minutes at room temperature. Every 20 minutes, the pH of the liquid was measured and a fluid sample as much as ±50 mL was taken to be settled for 24 hours. Next, the total suspended solid (TSS) concentration in the supernatant was analyzed. The results showed that the addition of alum could decrease the liquid pH and increase the TSS of the liquid. The coagulation process for 180 minutes resulted in a TSS reduction efficiency of 33.3, 33.3, 37.1, 1.7, -17.8% at alum doses of 1, 3, 5, 10, 15 g/L respectively. The first-order kinetic model provided a better prediction than the second-order kinetic model with R2 values of 0.7876-0.9707 and 0.2746- 0.8912, respectively.

Item Type: Article
Subjects: T Technology > TP Chemical technology
Divisions: 03-Fakultas Teknik > 24201-Jurusan Teknik Kimia
Depositing User: Iqbal Syaichurrozi
Date Deposited: 04 May 2023 15:30
Last Modified: 04 May 2023 15:30
URI: http://eprints.untirta.ac.id/id/eprint/23813

Actions (login required)

View Item View Item