caturwati, Ni Ketut and yusuf, dwinanto and attegar, attegar (2017) Optimization high vortex finder of cyclone separator with computational fluids dynamics simulation. MATEC Web of Conferences, 03 (009). ISSN 101-03009

	Text matecconf_sicest2017_03009.pdf - Published Version Download (515kB)
	Text peer review matec 2017.pdf Download (2MB)
	Text Turnitin NKC -matecconf_sicest2017.pdf Download (1MB)

Abstract

Cyclone separator is an equipment that separates particles contained in the fluid without using filters. The dust particles in the flue gases can be separated by utilizing centrifugal forces and different densities of particles, so that the exhaust gases to be cleaner before discharged into the environment. In this paper carried out a simulation by Computational of Fluids Dynamics to determine the number of particles that can be separated in several cyclone separator which has a ratio body diameter against vortex finder high varied as : 1:0.5 ; 1:0.75 ; 1:1 ; 1:1.25 and 1:1.5. Fluid inlet are air with antrachite impurity particles that are commonly found in the exhaust gases from tire manufacturers with inlet velocities varied as: 15 m/s and 30 m/s. The results of simulation show the fluids with 15 m/s of inlet velocity is generate particle separation value is higher than the fluids with 30 m/s inlet velocity for ratio of body diameter and height vortex finder a: 1:0.5 and 1:1.5. For both of inlet velocities the best ratio of body diameter and height vortex finder is 1:1.25, where it has the highest values of percentage trapped particles about 86% for 30 m/s input velocity and also for 15 m/s input velocity

Actions (login required)

View Item